budget friendly power glove (WIP)

Discuss Evil Dead related replica props you've made, and future projects
Post Reply
ashy slashy
Posts: 5
Joined: Fri Jun 05, 2020 10:27 pm

budget friendly power glove (WIP)

Post by ashy slashy »

a small step by step on my power glove thus far! your gonna need miliput, loctite super glue, a black arm fabric piece (or the actual leather glove), pvc pipe, cam buckle, nut and bolt, a drill, a dremmel, wire housing and decorational knob both from christof engel in the knights of sumeria facebook page, 1 inch black webbing, a piece of flashing, screws, red rocker switch, tiny LED, red and black wires, soldering stuff, a switch, a resistor, a 9 volt battery, silicone caulking, red and hammered effect spray paint, clear coat (all the same brand, rustoleum), black acrylic, a knife, some powerful magnets, a toggle latch, motorcycle chains, zip ties, 8 BICYCLE DERAILLEUR BRAKE CABLE HOUSING BRASS FERRULES CAP 5mm, brake cable outer housing vintage style clear plastic coat campangolo style, a small block of wood, an RC tie rod and lastly a clear USB cord!
You do not have the required permissions to view the files attached to this post.

Post Reply